Guy who invented the Super Soaker has a new high efficiency solar power cell.

One of the problems with solar power has been the relatively low efficiency of the solar cells which keeps the cost of generating any reasonable amount of electricity from the sun rather high. The best of the solar power plants manage around 40% efficiency at this point, but Lonnie Johnson (inventor of the Super Soaker) has developed a new type of solar cell that could be up to 60% efficient:

Johnson, a nuclear engineer who holds more than 100 patents, calls his invention the Johnson Thermoelectric Energy Conversion System, or JTEC for short. This is not PV technology, in which semiconducting silicon converts light into electricity. And unlike a Stirling engine, in which pistons are powered by the expansion and compression of a contained gas, there are no moving parts in the JTEC. It’s sort of like a fuel cell: JTEC circulates hydrogen between two membrane-electrode assemblies (MEA). Unlike a fuel cell, however, JTEC is a closed system. No external hydrogen source. No oxygen input. No wastewater output. Other than a jolt of electricity that acts like the ignition spark in an internal-combustion engine, the only input is heat.

Here’s how it works: One MEA stack is coupled to a high- temperature heat source (such as solar heat concentrated by mirrors), and the other to a low-temperature heat sink (ambient air). The low-temperature stack acts as the compressor stage while the high-temperature stack functions as the power stage. Once the cycle is started by the electrical jolt, the resulting pressure differential produces voltage across each of the MEA stacks. The higher voltage at the high-temperature stack forces the low-temperature stack to pump hydrogen from low pressure to high pressure, maintaining the pressure differential. Meanwhile hydrogen passing through the high-temperature stack generates power.

“It’s like a conventional heat engine,” explains Paul Werbos, program director at the National Science Foundation, which has provided funding for JTEC. “It still uses temperature differences to create pressure gradients. Only instead of using those pressure gradients to move an axle or wheel, he’s using them to force ions through a membrane. It’s a totally new way of generating electricity from heat.”

If this invention works as it’s expected to it’ll be a major jump forward in solar power generation. Above and beyond that, however, is the potential to use this sort of collector for more than just solar heat:

This engine, Johnson says, can operate on tiny scales, or generate megawatts of power. If it proves feasible, drastically reducing the cost of solar power would only be a start. JTEC could potentially harvest waste heat from internal combustion engines and combustion turbines, perhaps even the human body. And no moving parts means no friction and fewer mechanical failures.

No word on how soon they hope to put this to the test or how far away a practical application might be if it works, but hopefully it’ll be sooner rather than later.


1 thought on “Guy who invented the Super Soaker has a new high efficiency solar power cell.

  1. Hmm, so theoretically, a soldier on a battle field could power his own electrical needs… If theory holds up there are about a million applications of this.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.